Excavation Contractors Aurora

Frequently Asked Questions About Excavation Contractors

How do I calculate how much dirt I need for fill?

To calculate the volume of dirt (fill) needed, follow these steps:

1. Determine the Area: Measure the length and width of the area you want to fill. Multiply them to get the area in square feet (or meters).
2. Determine the Depth: Measure the difference between the existing grade and the desired grade (how much you need to raise the ground). This is the depth of fill required.
3. Calculate Volume: Multiply the area (step 1) by the depth (step 2) to get the volume in cubic feet (or meters).
4. Account for Compaction: Fill dirt compacts when it settles, so add 10% to 25% to the calculated volume to account for compaction. The exact percentage depends on the type of fill material.

For complex projects or uneven terrain, consult an excavation contractor or surveyor for accurate volume calculations.

What is the difference between cut and fill excavation?

Cut and fill excavation is a technique for balancing earthwork volumes on a site:
Cut: Involves excavating soil from an area where the existing grade is higher than the desired grade.
Fill: Refers to using the excavated soil ('cut' material) to raise the grade in an area where the existing grade is lower than desired.
This method minimizes the need to import or export soil, reducing costs and environmental impact. It's commonly used for site preparation, road construction, and landscaping.

What should I do before excavation starts?

Prior to the start of excavation, take these essential steps:

• Clearly Define the Scope: Outline the project's goals, including the excavation area, depth, grade, and intended use.
• Obtain Necessary Permits: Research and acquire any required permits from your local authorities.
• Mark Utility Lines: Contact your utility companies to locate and mark underground utilities to prevent damage.
• Communicate with Neighbors: Inform your neighbors about the project's timeline and potential noise or disruptions.
• Prepare the Site: Clear any obstacles, such as vegetation, furniture, or structures, from the excavation area.
• Discuss Safety Protocols: Review safety procedures with the contractor to ensure a safe work environment.

Taking these steps helps ensure a smooth and successful excavation project.

Do I need a permit for excavation?

Permit requirements for excavation vary widely depending on your location and the project's specifics. Generally, permits are needed for:

• Excavations Deeper Than a Certain Depth: This varies by jurisdiction, usually around 5 feet.
• Excavations Near Utilities: Digging near buried utilities (gas, water, electric) often requires permits and utility locates to prevent damage.
• Excavations Affecting Public Property: Projects impacting sidewalks, roads, or other public areas typically require permits.
• Excavations in Environmentally Sensitive Areas: Projects in wetlands, floodplains, or other sensitive areas might need special permits.

Contact your local building department or planning authority to determine the permit requirements for your excavation project. Failure to obtain necessary permits can result in fines or project delays.