Excavation Contractors Norwich

Frequently Asked Questions About Excavation Contractors

How do I calculate how much dirt I need for fill?

To calculate the volume of dirt (fill) needed, follow these steps:

1. Determine the Area: Measure the length and width of the area you want to fill. Multiply them to get the area in square feet (or meters).
2. Determine the Depth: Measure the difference between the existing grade and the desired grade (how much you need to raise the ground). This is the depth of fill required.
3. Calculate Volume: Multiply the area (step 1) by the depth (step 2) to get the volume in cubic feet (or meters).
4. Account for Compaction: Fill dirt compacts when it settles, so add 10% to 25% to the calculated volume to account for compaction. The exact percentage depends on the type of fill material.

For complex projects or uneven terrain, consult an excavation contractor or surveyor for accurate volume calculations.

What is the difference between excavation and grading?

While often used together, excavation and grading are distinct processes:
Excavation: Primarily involves removing earth or other materials from a site. It's about digging down and creating space.
Grading: Focuses on shaping and leveling the ground to a specific slope or elevation. It's about adjusting the existing terrain.
For example, you might excavate a foundation and then grade the surrounding area to ensure proper drainage and a level surface for landscaping.

How do you protect utilities during excavation?

Protecting buried utilities is paramount during excavation. Here are crucial steps:

• Utility Locates: Contact your utility companies to mark the locations of underground lines before excavation begins. This is usually a free service.
• Hand Digging: Excavate carefully by hand near marked utility lines to avoid damage.
• Potholing: Digging small test holes to expose and verify utility depths and locations.
• Safe Distances: Maintaining a safe distance between excavation equipment and marked utility lines.
• Vacuum Excavation: Using vacuum excavation techniques to expose utilities without digging, reducing the risk of damage.

Reputable excavation contractors prioritize utility protection and adhere to safety guidelines to prevent costly and potentially dangerous accidents.

How deep can you excavate?

The depth of excavation achievable depends on multiple factors:

• Soil Type and Stability: Stable, cohesive soils allow for deeper excavations than loose or unstable soils.
• Groundwater Level: Excavations below the water table require dewatering techniques to manage water intrusion.
• Equipment and Resources: The size and capabilities of excavation equipment influence the achievable depth.
• Safety Regulations: OSHA and other safety regulations impose limitations on trench depths without proper shoring or sloping.
• Project Requirements: The purpose of the excavation (basement, pool, foundation) determines the necessary depth.

Experienced excavation contractors can assess your site and project specifics to determine the safe and feasible excavation depth.